Free Wooden Block Plans: A 34-Piece Building Block Set With Cut List

This free plan makes a 34-piece wooden building block set in five shapes from three 2 × 2 boards and one 1 × 2. It covers the cut list, cutting diagram, rounding the edges, the small parts check and the US rules for selling toys. The PDF is free.

Categorized as Woodworking Business Tagged ,

This free plan makes a set of 34 wooden building blocks in five shapes: cubes, double blocks, long blocks, triangles and planks. Every size is a whole or half of a 1-1/2 in. unit, so the blocks stack and line up. The set is cut from three 2 × 2 boards and one 1 × 2, with no glue, screws or finish. You can download the plan as a printable PDF, with no sign-up.

The set is designed for children aged 3 and up. Every piece is larger than the CPSC small parts test cylinder. Building blocks appear in our list of wooden toys to make and sell, and they suit beginners: the work is straight cuts and sanding.

A set of plain wooden building blocks stacked into a small house with towers, a triangle gable and planks on a green rug.
The finished set, stacked into a house.

Wooden Block Plans at a Glance

PartShapeQuantitySize
ACube121-1/2 × 1-1/2 × 1-1/2 in.
BDouble block81-1/2 × 1-1/2 × 3 in.
CLong block41-1/2 × 1-1/2 × 6 in.
DTriangle41-1/2 × 1-1/2 × 1-1/2 in.
EPlank63/4 × 1-1/2 × 6 in.
WoodPoplar, maple or another close-grained hardwood
Ages3 and up
Skill levelBeginner
Build timeAbout 4 to 5 hours, most of it sanding (estimate)
FinishNone: leave the wood unfinished
Front views of the five block shapes drawn to scale: cube, double block, long block, triangle and plank, with sizes.

Tools You Need

  • Miter saw or a fine-tooth handsaw and miter box
  • Clamp and a scrap block to use as a stop block
  • Tape measure, square and pencil
  • Sanding block and sandpaper in 120, 180 and 220 grit
  • Router with a 1/8 in. roundover bit (optional, for the long sticks before cutting)
  • Wood-burning pen or stamp for the tracking mark
  • Safety glasses, hearing protection and a dust mask

See our woodworking safety rules before you start, and follow your saw maker’s instructions.

Materials

  • 2 × 2 × 3 ft. poplar board (actual 1-1/2 × 1-1/2 in.): 2
  • 2 × 2 × 2 ft. poplar board (actual 1-1/2 × 1-1/2 in.): 1
  • 1 × 2 × 4 ft. poplar board (actual 3/4 × 1-1/2 in.): 1

Choose straight boards with no knots, cracks or splits. Do not use treated wood, plywood or MDF. The 1 × 2 gives the planks.

Cutting Diagram

Cutting diagram: cubes, double blocks, long blocks and triangles laid out on three 2 by 2 boards, and planks on a 1 by 2.

How to Make Wooden Blocks, Step by Step

Step 1: Choose the Wood

Use solid poplar, maple or another close-grained hardwood. Pick straight boards with no knots, cracks or splits. Measure them: the plan assumes 1-1/2 in. square 2 × 2s and a 3/4 × 1-1/2 in. 1 × 2. Do not use treated wood, plywood or MDF.

Step 2: Round the Long Edges First

If you have a router, run a 1/8 in. roundover along all four long edges of each stick now, while it is long and easy to hold. If you don’t, you will round the edges by hand in step 5.

Step 3: Cut the Square Blocks

Trim 1 in. off each end. Clamp a stop block to the saw fence and cut the long blocks (C) at 6 in., the double blocks (B) at 3 in. and the cubes (A) at 1-1/2 in., following the cutting diagram. Cut all pieces of one length before you move the stop block. Cut the planks (E) at 6 in. from the 1 × 2.

Step 3 diagram: top view of a miter saw with a stop block clamped to the fence, cutting a 2 by 2 into equal blocks.

Step 4: Cut the Triangles

Use a piece of 2 × 2 at least 12 in. long. Make a 45° cut, then a square cut 1-1/2 in. along, and repeat. Each 1-1/2 in. of stick gives two triangles (D). Hold the stick with a clamp or hold-down and keep your fingers well away from the blade.

Step 4 diagram: a 2 by 2 stick marked with alternating 45 degree and square cuts that give two triangles per section.

Step 5: Round Every Edge

Sand every edge and corner to about a 1/8 in. radius, so no edge or point feels sharp. The triangle points need the most work. Then sand all the faces with 120, 180 and 220 grit.

Step 6: Check Every Piece

Run your fingers over every edge and face. Look for splinters, cracks or loose knots and remove any piece that has one. Count the pieces: 12 cubes, 8 doubles, 4 long blocks, 4 triangles and 6 planks.

Step 7: Mark and Store the Set

Burn or stamp your tracking mark on one block, and print it on the bag or box. Leave the blocks unfinished: plain, untreated wood keeps the CPSC lead and heavy-metal testing exemption.

Toy Safety and the Small Parts Check

Small parts check: the 1-1/4 inch test cylinder opening drawn over the end of a cube and the end of a plank, both larger.
  • Toys designed or sold mainly for children aged 12 and under are children’s products. The US Consumer Product Safety Commission (CPSC) regulates them, whatever the size of the business.
  • The toy safety standard ASTM F963 is mandatory (16 CFR Part 1250). It covers hazards such as sharp points and edges and small parts, and many tests follow drop, pull and twist (use and abuse) tests.
  • This plan is designed for ages 3 and up. Every part is too large to fit fully inside the CPSC small parts test cylinder, 1-1/4 in. wide and 2-1/4 in. long, so no choking hazard warning is needed for small parts.
  • Children’s products need third-party testing at a CPSC-accepted lab and a Children’s Product Certificate (CPC). Small batch manufacturers who register with the CPSC get relief from some third-party tests, but not all.
  • The CPSC has determined that unfinished, untreated solid wood does not need third-party testing for lead content or the heavy metals in ASTM F963. Paint, stain, varnish and other finishes or treatments remove that exemption, and paint and surface coatings must not exceed 90 ppm lead.
  • Each toy needs a permanent tracking label on the toy and its packaging, where practical: who made it, where, when and the batch.

Selling Wooden Blocks

Wooden blocks are children’s products, so the rules above apply before you sell them, including at craft fairs and on marketplaces. Leaving the blocks unfinished keeps the exemption from lead and heavy-metal testing. Sell the set in a bag or box printed with your tracking label details.

This is a summary to help you plan. It is general information, not legal advice. Read the CPSC pages listed under Sources, or ask the CPSC Small Business Ombudsman, before you sell.

See how to set the final selling price on your craft. Our blanket chest plans make a storage chest, and the top 10 woodcrafts to sell has more ideas.

Download the Printable Wooden Block Plans

The PDF has 8 pages on US Letter paper, with the cut list, cutting diagram, drawings, steps and the toy safety summary. It is free, with no sign-up.

Download the wooden block plans (PDF)

Build status: plan checked by calculation; not yet test-built. Facts checked: November 2026.

Sources


Discover more from AssembleAndEarn.com

Subscribe to get the latest posts sent to your email.

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.