Free Wooden Spoon Templates: Spoon, Spatula and Butter Spreader Plans

This free plan gives full-size printable templates for a 12 in. cooking spoon, a 12 in. flat spatula and a 6-1/2 in. butter spreader, cut from one hardwood 1 × 4. The post covers cutting, carving, shaping and a food-safe finish. The PDF is free.

Categorized as Woodworking Business Tagged ,

This free plan gives full-size, printable templates for three wooden kitchen utensils: a 12 in. cooking spoon, a 12 in. flat spatula and a 6-1/2 in. butter spreader. All three come from one hardwood 1 × 4 board. The post covers the blanks, side profiles, carving steps and a food-safe finish. You can download the templates as a printable PDF, with no sign-up.

The outlines are cut with a saw and the spoon bowl is carved with a gouge or hook knife, or ground out with a sanding drum. The spatula and spreader need no carving, only shaping and sanding, so they make good first projects.

Wooden cooking spoon with a carved bowl, a flat spatula and a butter spreader lying on a pale board beside a herb sprig.
The three utensils.

Wooden Spoon Templates at a Glance

PartUtensilLengthWidestBlank
ACooking spoon12 in.2-1/4 in.12-1/2 × 2-5/8 × 3/4 in.
BFlat spatula12 in.2-1/2 in.12-1/2 × 2-7/8 × 3/4 in.
CButter spreader6-1/2 in.1-1/16 in.7 × 1-3/8 × 3/4 in.
WoodOne 1 × 4 × 3 ft. hardwood board: maple, cherry or walnut
Skill levelBeginner
Build timeAbout 2 to 3 hours each (estimate)
FinishFood-grade mineral oil

The Templates

The PDF prints each template at actual size, with a 1 in. check square. The spoon and spatula are longer than a sheet of US Letter paper, so each prints in two parts on one page. Tape the parts together where the blue overlap bands line up.

The three utensil outlines shown small: a cooking spoon with its bowl marked, a flat spatula and a butter spreader.

Side Profiles

The handles end up about 1/2 in. thick for the spoon and spatula, and 3/8 in. for the spreader. The blade tips thin to about 1/8 in.

Side profiles of the spoon, spatula and spreader, showing the 3/4 inch blank, the carved bowl and the thinned blades.

Tools You Need

  • Printer, scissors and spray adhesive or a glue stick (for the templates)
  • Coping saw, scroll saw or band saw
  • Spoon gouge or hook knife, or a sanding drum in a drill or rotary tool
  • Rasp, spokeshave or a belt sander, for shaping
  • Clamps to hold the work while you carve
  • Sandpaper in 80, 120, 180 and 220 grit
  • Cut-resistant glove, safety glasses and a dust mask

Clamp the work, cut away from your body and hands, and wear a cut-resistant glove on the hand that holds the work. See our woodworking safety rules.

Materials

Use a close-grained hardwood such as maple, cherry or walnut, with straight grain along the length. Avoid knots in the handles and necks, where the utensils are thinnest. You also need food-grade mineral oil, and beeswax if you want a softer sheen.

Cutting Diagram

Cutting diagram: spoon, spatula and spreader blanks laid end to end on one 1 by 4 by 3 foot hardwood board.

How to Make Wooden Spoons, Step by Step

Step 1: Print the Templates

Print the three template pages at 100% (actual size), not “fit to page”. Measure the 1 in. check square on each page. For the spoon and spatula, cut out the two parts and tape them together where the blue overlap bands line up.

Step 2: Cut the Blanks

Trim 1 in. off the end of the board. Cut three blanks: 12-1/2 in. for the spoon, 12-1/2 in. for the spatula and 7 in. for the spreader, each the full width of the board.

Step 3: Trace the Templates

Stick each template to the top face of its blank with spray adhesive or a glue stick, with the grain arrow along the length of the board. Or trace around it with a sharp pencil. Mark the spoon bowl too.

Step 3 diagram showing the spoon outline and the bowl traced on a hardwood blank, with the grain along its length.

Step 4: Cut the Outlines

Clamp the blank or hold it on the saw table and cut just outside the line. Sand to the line with a spindle sander or a sanding drum. Peel off the paper.

Step 4 diagram showing the cut-out spoon lifted above the hardwood blank, leaving a spoon-shaped opening.

Step 5: Carve the Spoon Bowl

Clamp the spoon flat. Carve the bowl with a spoon gouge or hook knife, cutting across the grain from the rim toward the centre. Work down to about 7/16 in. deep, leaving about 5/16 in. of wood under it. Keep the cutting edge moving away from your hands.

Step 5 diagram showing the spoon bowl being carved with a spoon gouge held at an angle across the grain.

Step 6: Shape the Profiles

Mark the side profiles on the edges of each piece. Thin the spoon handle to about 1/2 in. and round the back of the bowl. Thin the spatula and spreader blades evenly from both faces so the tips end about 1/8 in. thick. Round every edge so the utensils feel smooth in the hand.

Step 7: Sand and Oil

Sand through 120, 180 and 220 grit. Wet the wood with a damp cloth, let it dry and sand again with 220 grit to remove raised grain. Flood with food-grade mineral oil, let it soak in, then wipe off the excess. Repeat a few times over a day.

Care Notes

  • Wash by hand with warm water and mild dish soap, then dry right away.
  • Do not soak them or put them in the dishwasher.
  • Oil them when the wood looks dry, with food-grade mineral oil or beeswax.
  • Avoid olive and vegetable oil. They can turn sticky and rancid.

Selling Wooden Spoons and Utensils

  • Sell them as a set, or one at a time. State the wood, the size and that they are oiled with food-grade mineral oil.
  • Include the care notes.
  • Utensils are light and small, so they ship well and suit craft fairs.

Rules for food-contact items can differ by state, and marketplaces may have their own. Check them before you sell. This is general information, not legal advice. See how to set the final selling price on your craft, and our cutting board plans and wooden bowl plans for matching kitchen pieces. The top 10 woodcrafts to sell has more ideas.

Download the Printable Wooden Spoon Templates

The PDF has 9 pages on US Letter paper, including three full-size template pages, the side profiles, the steps and a care card. It is free, with no sign-up. Print the template pages at 100% (actual size).

Download the wooden spoon templates (PDF)

Build status: plan checked by calculation; not yet test-built. Facts checked: November 2026.

Sources


Discover more from AssembleAndEarn.com

Subscribe to get the latest posts sent to your email.

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.